An easy-to-use, large LCD display panel shows the current room temperature measured by the fireplace, and the temperature can be easily adjusted using the + and – buttons. In the power range 1-5, you can easily adjust the heat output produced by the fireplace using the + and – buttons. Simple and easy menu structure. Scrolling texts in the menus. The fireplace comes standard with a room thermostat sensor on a short cable (length can be extended).

The standard features of the product include a Glass Cleaning system, where the airflows are designed to keep the glass of the fireplace firebox clean for as long as possible. A variable-speed flue gas motor continuously measures the speed. The pellet hopper features a mechanical safety thermostat that forcefully cuts off the pellet feed if the temperature in the hopper rises too high. A negative pressure sensor monitors chimney draft by measuring the air flowing through the fireplace. Weekly programming allows the option to set the fireplace to ignite and shut down at desired times. Automatic ignition via an ignition element; start the fireplace with the push of a button or set the desired room temperature, which the fireplace will follow by igniting and shutting down as needed.

• Hatch, combustion chamber, and burner pot made of cast iron
• Then the ash collection container must be lifted
• Plate heat exchanger / Shell and tube heat exchanger
• Front room air blowing with one/two blowers
• Room partitioning possibility with manual control: From above, from behind, from the right
• Hose connection location: Rear / Top / Side
• Removable firebox back or side elements (for sweeping)

EASY function

Easily change the pellet feed rate from the EASY menu on the display panel. If the pellets you are using are fine-grained or sparse, you can select another setting from the menu, and the fireplace will automatically adjust the pellet feed rate and the exhaust fan suction power in the right direction. (see image).

STAND-BY and DELTA settings

You can set your fireplace to ignite and extinguish according to your desired temperature with the Stand-By function. With the delta value, you can choose whether your fireplace ignites with an accuracy of 0.5 °C to 5 °C from the set room temperature.

WHITE Wi-Fi Module and Total Control application

Communication capability for older generation fireplaces using the TOTAL CONTROL smartphone application when purchasing the optional White Wifi module. The module is compatible with older and several discontinued products. The application allows you to control your fireplace using your phone via an internet connection! Get the app From the Play Store Thai From the App Store

2-year warranty (does not apply to the consumable ignition resistor, nor the circuit board which can be damaged e.g. by rapid consecutive power outages)
After installation we recommend filling out ExtraFlame commissioning form to ensure the best possible user support.