An easy-to-use display panel shows the current room temperature measured by the fireplace, and the temperature can be easily adjusted using the + and – buttons. In the power range of 1–5, you can easily adjust the heat output produced by the fireplace using the + and – buttons. Simple and easy menu structure.

The standard features of the product include a Glass Cleaning system, where the airflows are designed to keep the glass of the fireplace firebox clean for as long as possible. A variable-speed flue gas motor continuously measures the speed. The pellet hopper features a mechanical safety thermostat that forcefully cuts off the pellet feed if the temperature in the hopper rises too high. A negative pressure sensor monitors chimney draft by measuring the air flowing through the fireplace. Weekly programming allows the option to set the fireplace to ignite and shut down at desired times. Automatic ignition via an ignition element; start the fireplace with the push of a button or set the desired room temperature, which the fireplace will follow by igniting and shutting down as needed.

• Heat exchanger made of 10 mm thick boiler steel
• Hatch, combustion chamber, and burner pot made of cast iron
• Plate heat exchanger / Shell and tube heat exchanger
• Single-blower living area air supply, switchable off
• Hose connection location: Rear
• Ceramic ignition element, ignites quickly and the element lasts longer!
• Circulation pump with PWM (speed control) control
• Temperature and pressure safety switches
• Pressure relief valve 3 bar
• Expansion vessel for the unit's own water circuit (requires a separate expansion vessel for the system)
• Air vent as standard
• Pressure indicator with display panel
• Extra-spacious pellet hopper capacity +27 kg

EASY function

Easily change the pellet feed rate from the EASY menu on the display panel. If the pellets you are using are fine-grained or sparse, you can select another setting from the menu, and the fireplace will automatically adjust the pellet feed rate and the exhaust fan suction power in the right direction. (see image).

STAND-BY and DELTA settings

You can set your fireplace to ignite and extinguish according to your desired temperature with the Stand-By function. With the delta value, you can choose whether your fireplace ignites with an accuracy of 0.5 °C to 5 °C from the set room temperature.

COMFORT function

Set the fireplace to silent mode with the press of a single button

Black Mask screen and Total Control 2.0 application

The easy-to-use large Black Mask display comes standard with a Wi-Fi connection, allowing you to connect your fireplace wirelessly to your smart device using the Total Control 2.0 app. Get the app From the Play Store Thai From the App Store

2-year warranty (does not apply to the consumable ignition resistor, nor the circuit board which can be damaged e.g. by rapid consecutive power outages)
After installation we recommend filling out ExtraFlame commissioning form to ensure the best possible user support.